STRONG SAESHIN MediPro Pedicure Machine (CMDV4) + HMD03 (40,000 rpm)

Strong MediPro CMDV4 Pedicure Machine with HMD03 Handpiece and Suction Function

The MediPro device is manufactured in South Korea by Saeshin, one of the world’s leading manufacturers of dental and manicure-pedicure micromotor devices, which is known and renowned worldwide for its Strong brand, and, to a slightly lesser extent, under the Brillian and Traus brands. Top-notch quality, attention to detail and nuances, as well as modern design, are Saeshin’s hallmarks. The Saeshin MediPro is the “big brother” of the world-famous Saeshin Medi Power pedicure device. And although these two models look almost identical, the Saeshin MediPro’s “inner workings” are different and more advanced. The Saeshin MediPro has a maximum speed of 40,000 rpm, which is 10,000 rpm faster than the Saeshin Medi Power, and its torque has been increased by 2 N. One might think that the increase in power would be accompanied by an increase in weight, but no—the new handle is 10 g lighter, thanks to the introduction of a brushless motor, which has reduced both weight and noise.

Warranty: 12 months for the control unit and 6 months for the handle.

Technology:

• Speed: up to 40,000 rpm
• Brushless motor: no need to replace brushes (lighter weight and much quieter compared to motors with brushes)
• A modern, easy-to-use membrane keyboard
• Reverse (cutter rotation direction: left and right)
• Tip: brushless motor that does not require carbon brush replacement
• High torque, low vibration, quiet operation
• Suitable for all standard drill bits with a diameter of 2.35 mm
• Double-sealed ball bearings

Technical Specifications:

• Dimensions: L 273 x W 142 x H 235 mm (including external parts: L 313 x W 142 x H 235 mm)
• Suitable for all modes of transportation
• Total weight: 4.9 kg
• Power: 120V
• Voltage: 230 V, 50 Hz, 230 W
• Noise level: 49 dB (55 dB at full power)
• Handle: Ø 27 mm, length: 265 mm, weight: 368 g
  

Beware of counterfeit and contraband goods!

Characteristics of original products:

• Certificate
  Before making a purchase, be sure to ask the retailer for a certificate of conformity.

• Warranty Period
  Original Saeshin products come with a 12-month warranty.

• Manufacturer's engraving
  The name, model, and serial number are engraved on the handle housing. The markings must be clearly legible.

• Power cord
  Genuine devices from South Korea have one of the following inscriptions on the power cord: KOREA CORD CO., LTD. or DONG YANG.

• Company sticker
  The original device casing features a special information label on the bottom of the device. Check that the font, proportions, and icons are correct.

• Design
  Make sure that the shape of the housing, the color scheme of the base and handle, and the fonts used in the selected model comply with the official specifications.

USE AND MAINTENANCE:

• Change the direction of rotation to theoppositedirection (reverse)ONLY after the motor has COME TO A COMPLETE STOP,andthen switch theFWD/REV button.
• Always bring the machine to a complete stopbeforechanging the cutter head!
• The diameter of the milling cutter shankis2.35 mm, and its minimum length is10 mm.
• Do not userusted or damaged drill bits; this can cause the micromotor's bearingsto wear out quickly.
• Do not install a wet or dusty drill bit on the micromotor.
• ALWAYS STORE THE MICROMOTOR WITH THE CUTTING BIT INSTALLED.
• Avoid damaging the device.
• NEVER turn on the micromotor without a cutter or nozzle attached!
• NEVER IMMERSE OR WASH THE MICROMOTOR!

WHAT TO DO:

Every day after finishing work, you must:

• Wipe dustoffthe exterior of the device with a soft cloth, using alcohol-based cleaning solutions or a vacuum cleaner.
• Clean the open nozzlewitha brush.
• Performregular maintenance periodically:cleaning, adjustments, brush replacement, and so on.
• The frequency of cleaningdependson how often the equipment is used and the conditions under which it is used.
• The recommended frequency for professional use isat least once every three months.
• Cleaning must be performed by a qualified technician!
• If you notice any initial signs of malfunction, contact the Nailinfinity service center immediately.