MARATHON MINI_cro Pink with SAEYANG + H200 Battery (30,000 rpm)

The Saeyang brand offers high-quality tools for professional manicure and pedicure treatments. Highly regarded by cosmetologists, Saeyang products offer exceptional precision, innovative solutions, and superior craftsmanship.

The Marathon Mini Cro is a cordless electric nail drill that uses the dry technique. The Marathon Mini Cro can be an excellent choice as a first device for professional in-office pedicurists. The rotation speed and direction can be adjusted according to the needs of the procedure; the maximum speed is 30, 000 revolutions per minute, both clockwise and counterclockwise. The Marathon Mini Cro H200 handle is designed for long-term use and comfort. The Mini Cro is equipped with a 2,600 mA Li-ION battery, which allows the device to be used cordlessly for 4 to 10 hours. The battery fully charges in 1.5 hours.

Genuine Marathon product

Warranty: 12 months for the control unit and 6 months for the handle, ensuring long-lasting and reliable performance.
The rubber mat is not included in the set; it can be purchased separately!

Specifications:

1. Charging time: 3 hours, work hours of up to 10 hours;
2. 4-color LED speed indicator: (White ~6,800 rpm / Sky blue ~15,300 rpm / Blue ~20,000 rpm / Pink ~30,000 rpm);
3. When the battery level drops below 30%, the LED light begins to flash.

Technical Specifications:

• Connected Technology & Battery-Powered
• Twist-lock system
• 4 to 10 hours of battery life
• 2,600 mA Li-Ion battery
• 25W drilling power
• 5.71 Ncm of torque
• Two hundred twenty to two hundred forty volts
• Handle model: H200 12V
• Speed: 30,000 rpm
• Torque: 2.9 Ncm
• Voltage: 12V
• Weight: 150 g

USE AND MAINTENANCE:

• Change the direction of rotation to the opposite direction (reverse) ONLY after the motor has COME TO A COMPLETE STOP, and then switch the FWD/REV button.
• Always bring the machine to a complete stop before changing the cutter head!
• The diameter of the milling cutter shank is 2.35 mm, and its minimum length is 10 mm.
• Do not use rusted or damaged drill bits; this can cause the micromotor's bearings to wear out quickly.
• Do not install a wet or dusty drill bit on the micromotor.
• ALWAYS STORE THE MICROMOTOR WITH THE CUTTING BIT INSTALLED.
• Avoid damaging the device.
• NEVER turn on the micromotor without a cutter or nozzle attached!
• NEVER IMMERSE OR WASH THE MICROMOTOR!

WHAT TO DO:

Every day after finishing work, you must:

• Wipe dust off the exterior of the device with a soft cloth, using alcohol-based cleaning solutions or a vacuum cleaner.
• Clean the open nozzle with a brush.
• Perform regular maintenance periodically : cleaning, adjustments, brush replacement, and so on.
• The frequency of cleaning depends on how often the equipment is used and the conditions under which it is used.
• The recommended frequency for professional use is at least once every three months.
• Cleaning must be performed by a qualified technician!
• If you notice any initial signs of malfunction , contact the Nailinfinity service center immediately.